|
Electrode |
AWS |
Description |
Specification |
|
|
E6010 |
Fill freeze, out of position pipe welding, mild steel & low
alloy steel stick electrode, for positive DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E6011 |
Fast freeze, out of position mild steel stick electrode, for
AC or DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E6012 |
Fill freeze, high speed, mild stick electrode, suitable for
AC output or negative DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E6013 |
Fill freeze, high speed, mild stick electrode, for AC output
or DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E7010 |
Fill freeze, out of position pipe welding, mild steel & low
alloy steel electrode, for positive DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E7014 |
Fill freeze, high speed, mild stick electrode, suitable for
AC output or DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E7018 |
Low hydrogen, mild steel stick electrode, for positive DC or
AC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E7024 |
Fast fill, high deposition, mild steel stick electrode, for
AC or DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E8010-G |
Free freeze, out of position pipe welding, mild steel & low
alloy steel stick electrode for positive DC output welding |
2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E308 |
Stainless Electrode |
1.4mm, 1.6mm, 1.8mm, 2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E308L |
Stainless Electrode |
1.4mm, 1.6mm, 1.8mm, 2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E347 |
Stainless Electrode |
1.4mm, 1.6mm, 1.8mm, 2.0mm, 2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E309 |
Stainless Electrode |
2.5mm, 3.2mm
4.0mm, 5.0mm |
|
E316L |
Stainless Electrode |
2.5mm, 3.2mm
4.0mm, 5.0mm |
ENi-Cl
(Cast iron) |
Pure nickel, excellent general properties. Used to weld thin
cast iron part and repair welding machined surface, such as
guided way of machine tool. |
|
ENiFe-Cl
(Cast iron) |
Iron nickel, high strength and excellent ductility. Repair
welding of important gray cast iron and nodular cast iron,
such as cylinder cap. |
|
ENiCu-B
(Cast iron) |
Copper nickel, good machinability and bad crack resistance.
Repair welding of sand hole and gray cast iron machined
surface subject to no load. |
|
ENi-1
(Nickel alloys) |
Pure nickel. Welding and surfacing of nickel and nickel to
steel. |
|
ENiCu-7
(Nickel alloys) |
Copper nickel. Welding and surfacing of copper nickel and
copper nickel to steel. |
|
ECu
(Copper alloys) |
Red copper, atmosphere and sea water corrosion and excellent
electric conductivity. Welding of red copper such as
electrical copper row. |
|
ECuSi
(Copper alloys) |
Silicon bronze, corrosion resistance and high strength.
Welding of copper, silicon bronze and brass. |
|
ECuSn-C
(Copper alloys) |
Tin phosphor bronze, corrosion resistance and high strength.
Welding of copper, silicon bronze and brass. |
|
ECuAl-A2
(Copper alloys) |
Aluminum bronze, wear and corrosion and high strength.
Welding or surfacing of copper alloys. |
|
E1100
(Aluminum alloys) |
Pure aluminum, excellent corrosion resistance and middle
strength. Welding of pure aluminum. |
|
E4043
(Aluminum alloys) |
Silicon aluminum, good crack resistance and wide range of
usage. Welding of aluminum alloys other than aluminum
magnesium alloys. |
|
E3003
(Aluminum alloys) |
Manganese aluminum, corrosion resistance and high strength.
Welding of aluminum alloys. |
|
|
|
HRc≥48. Resistance to
wear, gas corrosion and oxidation. Hardfacing of blast
furnace hopper and cracker part. |
|
ECoCr-A
(Hard-surfacing) |
HRc38-47. Resistance to heat, wear and corrosion. Hardfacing
of high temperature part such as the edge of thermo-cutter. |
|
ECoCr-B
(Hard-surfacing) |
HRc45-50. Resistance to heat, wear and corrosion. Hardfacing
of high temperature part such as internal-combustion engine
valve. |
|
|
|
HRc≥53. Resistance to
Wear and heat, bad shock resistance. Hardfacing of rotating
blade wheel of boiler. |
|
ECoCr-C
(Hard-surfacing) |
HRc≥50. Wear and heat
resistance. Hardfacing of high temperature part such as
hot-rolling guided way. |
|
|
|
HRc28-38. Corrosion and thermo-fatigue resistance, work
harding. Hardfacing of hot forging die. |
|
Products